Ducting Supports
Ducting Clamp PLU 1G-N
Group: 1622
Application
Two-piece pipe clamp for simple installation of spiral-seam ducts.
Configuration
Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for "single-hand" mounting. Easier handling and better storage possibilities due to optimized packaging.
Assembly
Tighten upper part of the pipe clamp without the interfering lower part.
Hook the lower part, provided with a keyhole, into the fixed clamping bolt (see picture). After mounting of the pipe and locating into the pivot screw, the clamping bolt is fixed behind the bending; then tighten clamping bolt with max. 2 Nm.
Technical Data
| Type | Material [mm] | Perm. load capacity [kN] | Thread connection |
|---|---|---|---|
| 71 - 200 | 20 x 1.5 | 0.8 | M8 |
| 224 - 500 | 25 x 1.5 | 1.0 | M10 |
| Material: | Steel, galvanised |
| Type | W [kg] |
Quantity [pack] |
Part- No. |
|---|---|---|---|
| 71 | 0.09 | 50 | 199626 |
| 80 | 0.10 | 50 | 199633 |
| 90 | 0.10 | 50 | 199640 |
| 100 | 0.11 | 100 | 199657 |
| 112 | 0.12 | 100 | 199664 |
| 125 | 0.13 | 100 | 199671 |
| 140 | 0.14 | 80 | 199688 |
| 150 | 0.15 | 80 | 199695 |
| 160 | 0.16 | 80 | 199701 |
| 180 | 0.17 | 50 | 199718 |
| 200 | 0.18 | 50 | 199725 |
| 224 | 0.34 | 50 | 199732 |
| 250 | 0.37 | 40 | 199749 |
| 280 | 0.38 | 40 | 199756 |
| 300 | 0.41 | 40 | 199763 |
| 315 | 0.45 | 40 | 199770 |
| 355 | 0.47 | 40 | 199787 |
| 400 | 0.56 | 30 | 199794 |
| 450 | 0.58 | 20 | 199800 |
| 500 | 0.67 | 20 | 199817 |